Services: 10 Mistakes that Most People Make

Some Basic Information about Drain Cleaning – Why There are Blocks and How to Solve Them

All buildings need to be provided with clean water and effective draining of waste so that internal activities will run smoothly. A healthy and safe environment is ensured to the owners and tenants of buildings if there is a proper drainage of waste from these buildings.

There are circumstances that would have drains blocking. In order to carry out drain cleaning, you would then need the services of a skilled plumber. An owner or a tenant will be assured of a clean environment when the plumber will successfully drain the wastes from the building.

When there is a blockage of drains in a building, then drain cleaning is to be required. There are many occasions that would cause blocked drains. An example would be too big foreign objects that are flushed down the toilet and are too big to pass the drain. Sometimes, hair are washed down the sink, have accumulated in the drainage pipes, and would result to drainage blockage. Usually, we wash down grease and fatty substances down the sink and this would result to blockage of drainage pipes once they get stuck on the sides of these pipes.

Other circumstances that would cause drain blockage in time are leaves which are not properly swept off and disposed off in garbage that would find their way into the drainage pipes, and even roots of trees, because they are attracted to moisture, will crack the pipes to get water and this could cause blocked drains.

A plumber can perform drain cleaning with the use of a hydrojetter. With water that is under very high pressure, a hydrojetter would release it and thus remove all the dirt that are blocking the drains. Lowering the hydrojetter into the drain, the plumber pushes it until it reaches the area where there is a blockage. The pressurized water will then break down the blockage into small particles, will also get rid of the particles on the sides of the pipes, thus allowing the water to drain drown the waste freely without obstacles.

Another method to solve drain blockage is the drain snake, which is a long and flexible cord that is made up of wires, and these are pushed down the drain to the area where there is blockage. The wires are then turned by the motor resulting to breaking down the obstruction into small particles, then these small particles are pushed down the drain thereby allowing free flowing of wastes.

Where the location of the blockage is, is an important consideration so that the plumber can perform drain cleaning efficiently.

3 Lessons Learned: Tips

8 Lessons Learned: Tips